Automatic Welding Oscillator PLC Control Linear Type Welding Oscillator 220/110V

Description

Automatic Welding
Oscillator PLC Control Linear Type Welding Oscillator 110V /
220
V
Introduction:
Welding oscillator is mainly suitable for MIG / MAG (GMAW), TIG (TIG), plasma welding and other welding torch swing. The oscillator input and output interfaces can be easily left with a combination of welding positioner, welding wheel frame welding and the like using a cross-arm automatic or semi-automatic welding, for welding fillet welds, pressure vessels, flanges, steel, shipbuilding, piping, etc., can replace a large number of skilled welders, access to quality and efficient welding process.
Specification:
Voltage: AC 220V
50Hz  or 110V 60hz
Swing tracks: linear type
Welding process No.: 10
Set time rage: 0-6000s
Swing speed range: 0-50mm/s
Swing range: +/-50mm
Left stop time range: 0-9.9s
Right stop time range: 0-9.9s
Middle stop time range: 0-9.9s
Up and down effective travel: 100mm
Rate load: 5kg
Controller dimension: 260*360*136mm
Product Features:
(1) High reliability PLC control ensuring the user’s welding technology can be performed accurately.
(2) Adopt stepping motor drives the screw transmission, high control precision, long service life.
(3) Totally enclosed mechanical parts design can ensure good weld forming.
(4) Adopt text display as human-computer interface, parameter setting is simple, good for man-machine interactive.
(5) The effective travel is 50/100mm, the maximum oscillation amplitude can be set to 50mm,the fastest swing speed reaches 3000mm/min.
(6) Can save ten sets of oscillating process in advance, according to the thickness of the plate and the width of the weld seam, adjusting the suitable welding process.
(7) Timing function, set up to 100 min or 6000s.
(8) Each set of welding technology in the oscillation amplitude, swing speed and swing left stop, swinging middle stop and swing right can be set separately.
(9) Can work alone and also can on-line work. It reserved input and output interface, The input interface controls the start and stop, the output interface controls welder or other equipment’s start and stop.
(10) Each oscillation parameters can be modified during the whole swing process, and can adjust center position according to the fieldsituation  without stop.
(11) Can adding manual/pneumatic adjustment slider for swing parts according user’s requirements, which improve automatic level.
(12) Equipped with manual control, both screen and manual control can control swing, which is convenient for operation.
Operating Instructions:
(1) Turned on, the first screen appears, oscillator interface, swing numbers: 0-9, represents the currently selected swing number.
Timing: oscillator run out of time.
Press the left black triangle button, Oscillators slider to the left, press the right triangle button, move the slider to the right oscillator; pressing the ENT key swing begins swinging normal operation,  oscillator start time, time to set the timing, the swing is stopped swinging side; if you want to stop in the middle swing press ESC oscillator side stops running. Whether the timing is position. If found during the wobble deviates from the weld can be adjusted by hand swing motor behind the handwheel adjustment of the swing swing position.
(2) In the swing operation interface, press down key or the key to enter the corresponding number oscillator parameters, you can continue to press the key or the key to scroll to the number you want to change the swing.
Timing: oscillator Swing running time.
Swings: oscillator Swing amplitude.
Swing speed: Line speed oscillator changes.
Swing left stay: swing to the left the residence time.
Swing intermediate stay: swing to the middle of the residence time.
Swing the right to stay: swing to the right residence time.
Manually enter the parameter setting interface, you can manually move around speed.
Manually move around speed: manual control slider speed when moving.
Please note that if modifications need to change the parameters of the display parameters, press the SET button, the corresponding parameters will be changed into a black background, with the number keys (0-9) can modify the parameters, modify, display the actual value, whichever, parameter modification is completed, you must press the ENT key. If you do not want to change press the ESC key to exit the change. Press ESC again to return to the swing operation interface.
What in Package:
1 x Welding oscillator tool kit