Magnetic Tunnel Pipe Torch Gas Cutting Machine Cutter CG2-11 AG Free shipping

Description

Specifications
1.Weight(body) 14.5KG
2. Machine dimension 305MMX310MMX180MM
3. Power source 110V or 220V 50HZ
4. Cutting speed 50-750MM/MIN
5. Cutting thickness 6-50MM
6. Groove angle 0°-45°
7. Cutting range ￠＞108MM(The no-seam pipe)
8. Cutting accuracy When the machine walks a cycle on pipe, the error is below
0.5mm every 1m circumference. The smoothness of cutting
and groove can reach
9.Adsorption affinity of
magnetic roller wheel
Above 50kiograms
10. Impulse of machine. When the machine walks up and down, it is below 0.5mm.
11. Motor It adopts 70SZ08 servo-motor. 6000r/min, 68W
Driving mechanism
It is made up of 70SZ08 DC servo-motor, three pairs of gears (the reducing gear M=0.8) and
a worm-gear conjugation
Introduction:
1, The main body is made of aluminum alloy, light and portable
2, It adopts permanent magnet wheel to crawl on pipe while cutting.
3, Can be used for parallel, upright and face upward cutting.
4, Bevel angle: I.Y.V(45°)
5, Especially for circular cutting, convenient in operation.
6, Widely applied to oil production, chemical pipe project.
7, 12 months Warranty
Standard pack
1. Main body ：1set
2. Standard torch unit assemblage ：1set
3. Connector of torch ：1set
4. Tip （G0 ＃1，2、 3， ）: 1pc each
5. Gas-in connector : 1 set
6.Electric case and connecting wire ：1set
7. Specification sheets and certificate of
qualification:
1 pc each
8. Safety rope : 1pc
9.Safety buckle ：1pc
10.fuse(3A) ：1p
CONTACT US:
1.
we don't ship the item to PO BOX address， and we only ship the item to English address, so please leave us your physical English address when you pay
2.A good feedback is very important for our store,if you feel satisfied with our products,please give us  positive feedbacks.
3.Please contact us before leaving any negative or neutral feedback,We will work with you to solve any problems.